Contents
SpecificationOPEN Alliance

OPEN Alliance specifications

Interoperability, test and conformance specifications for automotive Ethernet

OPEN Alliance specifications help engineers build and test automotive Ethernet components and networks that work reliably together.

What it is

OPEN Alliance publishes an industry specification family supporting automotive Ethernet implementation, interoperability and testing. Interoperability means that components from different suppliers can communicate correctly; conformance means that an implementation satisfies a defined set of requirements.

The collection contains individually versioned documents for particular Ethernet technologies, interfaces and test scopes. It is not a regulation or a single universal Ethernet approval. A project must identify the documents relevant to its chosen hardware and network design.

Released specifications are available through the public specification catalogue, subject to the applicable download and use terms.

Who it applies to

The specifications matter to vehicle manufacturers, ECU and switch suppliers, semiconductor vendors, harness and connector suppliers, and test laboratories. Their practical applicability depends on the technology being implemented and the requirements agreed with the customer.

Network engineers normally coordinate interoperability evidence, while hardware engineers address physical implementation and measurements. Basic-software engineers need the documents that affect transceiver control, host communication and power-state behavior.

For example, a small Ethernet node using a compatible external MAC-PHY needs the relevant host-interface specification. An ECU using a different MAC-to-PHY arrangement does not automatically need that interface.

What it covers

Coverage varies by document and Ethernet variant. Select a coherent set rather than assuming that every published specification applies.

Document group Engineering purpose
PHY conformance and interoperability tests Check physical-layer behavior and operation between implementations
Channel and component requirements Define expectations for the electrical path and its components
EMC test specifications Evaluate electromagnetic compatibility of specified devices or assemblies
ECU and switch tests Evaluate behavior at a broader integration boundary
Sleep/wake and diagnostic specifications Support power-state coordination and physical-link investigation
MAC-PHY serial interface Define communication between a host controller and a compatible MAC-PHY

For 10BASE-T1S, the collection includes tests for physical-layer functions and Physical Layer Collision Avoidance, or PLCA, which coordinates transmission opportunities on a shared segment. It also includes implementation guidance and interface specifications.

TC6 defines a serial host interface for compatible 10BASE-T1x MAC-PHY devices, including Ethernet-frame transfers and control access. This concerns the local connection inside a node; it does not define middleware or application messaging.

How it fits with other documents

IEEE 802.3 supplies the underlying Ethernet definitions. OPEN Alliance documents complement those definitions with automotive implementation requirements, interfaces and test methods. Read each document’s references and scope to establish the exact relationship.

AUTOSAR specifications address software architecture and standardized software interfaces. A TC6 driver may support an Ethernet software stack, but implementing TC6 alone does not establish AUTOSAR compliance.

Customer requirements determine the contractual acceptance scope. Functional-safety and cybersecurity engineering require their own evidence; passing Ethernet conformance tests alone does not establish either.

In practice

Start with the selected Ethernet variant, topology, PHY or MAC-PHY, host interface and power concept. Build an applicability list recording each document’s title, revision, relevant requirements and responsible supplier.

Agree the test boundary before ordering measurements: a transceiver, assembled ECU and complete network provide different evidence. Record device revisions, firmware, configurations, fixtures and link partners so results can be reproduced.

For a TC6-based node, include driver behavior and serial-interface error handling in integration checks. For a shared 10BASE-T1S segment, include PLCA configuration and interoperability between intended participants.

Use failures to assign corrective work to the responsible component or integration team. Retain test reports against the agreed document revisions, and assess whether component or software changes require renewed testing.

Source basis: OPEN Alliance specification catalogue, 10BASE-T1S committee scope and TC6 serial interface specification.

What it means for your discipline

  • Networks & communicationCore

    Select the applicable Ethernet specifications and own the interoperability and conformance test plan. Translate results into network integration and supplier acceptance decisions.

  • Hardware & siliconCore

    Apply the relevant transceiver, channel, component and EMC requirements to circuit and harness design. Prepare hardware configurations and measurements for compliance testing.

  • E/E architecturePartial

    Understand how topology, physical interfaces and sleep/wake behavior constrain ECU and network choices. Allocate requirements across ECUs, switches and suppliers.

  • Base softwarePartial

    Implement the selected PHY control and host-interface behavior in drivers and Ethernet integration. For compatible MAC-PHY devices, TC6 affects serial transfers, register access and error handling.

  • Diagnostics & lifecyclePartial

    Use applicable PHY diagnostic capabilities when designing link-fault detection and service information. Distinguish physical-link evidence from failures in higher-layer diagnostic communication.

  • CybersecurityPartial

    Assess the applicable automotive MACsec and key-management specifications when link protection is selected. Coordinate their integration with the vehicle security architecture.

No direct stake: Functional safety · HPC & application software · Software update & OTA